DXF
Send a cutting profile straight to whoever cuts it, with the loops separated so nesting and cutting do not need the file tidied first.
A design with a two dimensional profile exports as a DXF, with outer loops and cutouts on their own layers.
| Status | Works today: Kabaido code talks to the provider. |
| Kind | CAD, CAM and file formats |
| For | Design Engineer |
| What moves | Out: the profile as a layered DXF. In: an attached DXF, measured for its profile or nested by the plasma machine module. |
| What you hand over | Nothing. The file is written from your own configuration and it is yours. |
What you get
Send a cutting profile straight to whoever cuts it, with the loops separated so nesting and cutting do not need the file tidied first.
Connect it
In Settings then Integrations, open the entry and follow its steps:
- Step 1.
Configure a design that has a two dimensional profile.
- Step 2.
Choose DXF on the export.
- Step 3.
Outer loops are written on one layer and cutouts on another.
- Step 4.
Attach it to the quote, or hand it to your cutting software.
More
- On the website: DXF.