Autodesk Fusion CAM
It would pass the configured geometry and its cutting data straight to Autodesk Fusion CAM, so the programmer started from the design rather than from a file somebody found.
Not built yet. A direct Autodesk Fusion CAM hand off is on the roadmap with no date.
| Status | Roadmap: Not built yet. Tell us what you need and we will talk it through. |
| Kind | CAD, CAM and file formats |
| For | Design Engineer and Machinist |
| What moves | Nothing moves yet. Design Engineer writes STEP, STL, DXF and PDF today, and the cutting list exports as CSV, all of which Autodesk Fusion CAM takes. |
| What you hand over | Nothing to hand over yet. A connection would run on your own Autodesk Fusion CAM licences. |
What you get
It would pass the configured geometry and its cutting data straight to Autodesk Fusion CAM, so the programmer started from the design rather than from a file somebody found.
Asking for it
This connection is not built yet. Tell us what you need it to do; until then the universal paths reach any system with an API.
More
- On the website: Autodesk Fusion CAM.