Does it install a grinding wheel family?

No. It installs the bore cutter and hogger family; none of the seeded families describes a grinding wheel.

Is every job confirmed?

Not every job. As installed, an always confirm rule asks the customer by link when a cutter cannot be serviced.

Wheel re-profiling and balancing, Product servicing

Inspection out and packing to Ready and loading: the item reads Completed

From the live engine

Standard minutes installed with Wheel re-profiling and balancing

How long a step should take: setup plus per unit, against the driver that scales it.

Station group	Family	Service	Setup	Per unit	Driver	Source
Goods in	Every family	Every service	5	0.5	Per piece	Illustrative
Inspection in	Every family	Every service	4	4	Per piece	Illustrative
Marking	Every family	Every service	2	1	Per piece	Illustrative
Rotary tool grinding	Every family	Every service	20	25	Per piece	Illustrative
Balancing and run out	Every family	Every service	10	15	Per piece	Illustrative
Inspection out and packing	Every family	Every service	5	1	Per piece	Illustrative
Ready and loading	Every family	Every service	5	0.25	Per piece	Illustrative

Every figure is illustrative until you time your own.

Demonstration data, invented companies

Rules installed with Wheel re-profiling and balancing

Ask the customer when the service costs more than this share of a new one.

At inspection, raising a decision offering proceed, scrap or replace with the equivalent.

Share of a new one, per cent

Ask the customer when the measured price moves further than this from the declared one.

At inspection, on a service model that is subject to inspection.

Movement allowed, per cent

Always ask the customer in these cases, whatever their other rules say.

Whenever one of the named cases happens, raising a decision.

Cases

Demonstration data, invented companies

: No. It installs the bore cutter and hogger family; none of the seeded families describes a grinding wheel.
: Not every job. As installed, an always confirm rule asks the customer by link when a cutter cannot be serviced.