Sawing and blade supply
Blade buyers describe the job, not the blade, and the same blades come back for resharpening again and again.
Your own workspace, right now.
30 minutes with us on your own job.
The right blade chosen from the job, matched to your stock, and every resharpen counted.
- The blade is chosen from material, section and machine, with every rule shown.
- Your customers can choose it on your own website too.
- Every choice is matched to your own catalogue.
- Blades back for resharpening or retipping are booked in under their own code, each with its service count.
The bandsaw blade wizard's specification for one stated job, computed by the live engine: blade family, a 3/4 TPI pitch, width, band speed and coolant, each line naming the chart it came from.
80 mm round bar, stainless steel 304, horizontal saw up to 34 mm
Real requests
A bandsaw coil reorder
2 coils of 27mm 0.9mm bimetal M42 bandsaw blade, 6-10 TPI, for general steel
Width, thickness, material and 6-10 TPI read as written, then matched to your coils.
Tipped blades for non ferrous
3 off 300mm 96T carbide tipped circular saw blade, 30mm bore, TCG tooth form, for non ferrous
TCG read as the tooth form, carbide tipped as the material, then matched line by line.
Cold saws back for regrinding
2 off 350mm 72T cold saw blade, re-grind only
Booked in as a service line, each blade under its own code with its regrind count.
See it work
A PCD saw blade in 3D, as the design workbench builds it, turning while it moves through three configurations: Diameter 350 mm, Tooth count 72 T, Tooth configuration TCG, trapezoid and raker, £568.64 for 1 off. Diameter 300 mm, Tooth count 60 T, Tooth configuration ATB, alternate top bevel, £497.41 for 1 off. Diameter 250 mm, Tooth count 40 T, Tooth configuration FTG, flat top, £381.72 for 1 off.
From the live enginePrices at the example rates each design module ships with
Every blade back for sharpening
Each through your stations under its own code.
Saw blade sharpening and retipping, Product servicing The Saw blade sharpening and retipping service model as its preset installs it: 11 stations in order, with one item going through them and the Service Centre status strip showing where it is at each. The stations: Goods in, Cleaning, Inspection in, Marking, Body work, Tooth replacement, carbide, Saw grinding, Bandsaw and chain, Balancing and run out, Inspection out and packing, Ready and loading.
Inspection out and packing to Ready and loading: the item reads Completed
From the live engine
Products that apply
- WizardChooses the blade from material, section and machine, on your site too.
- Sales EngineerReads each blade enquiry and matches it to your catalogue.
- Service CentreTracks every resharpen and retip under the blade's own code.
- CommerceGives customers their own sign in for quotes, orders and items.
Not for: Making TCT or HSS blades to order: the blade design module is PCD only.
Proof you can check
- Public pricingEvery plan on one page. No overage.
- Honest integration labelsEach one says whether it works today.
- Security, specificallyWhere your data lives and who reads it.
Funding in England can cover up to half a digital project.How funding works
Send us one job
Forward two or three recent blade enquiries and see each blade chosen, matched and priced.
Presets for this trade
The presets for Sawing and blade supply as Settings, Presets lists them, each counting what it brings: Saw blades, Saw sharpening and retipping. Each is opened in turn to name what it sets up and what it is not for, then the first is set up and marked On.
Saw blades is on
What each preset installs
Saw blades
- Four blade schemas
- Bandsaw blade wizard
- PCD saw blade selector
- PCD saw blade design module
Saw sharpening and retipping
- Saw blade sharpening and retipping
- Cold saw resharpening and re-segmenting
- Saw sharpening service model
Questions
- Yes. The bandsaw blade wizard embeds on your own site and matches its answer to your catalogue.More on Bandsaw blade wizard
- Yes. The retipping station is timed per tooth replaced, on illustrative times you replace with your own.More on Saw sharpening and retipping
- Yes. Saw blades installs four blade schemas in one catalogue: bandsaw, circular, tipped and HSS cold saw.
- Enough to start. The wizard asks for the rest, and the AI cites what is stated and asks for what is not.