Service model
Batch surface treatment
Coating and treatment of parts in batches, weighed and counted in, priced per batch.
The Batch surface treatment service model as its preset installs it: 5 stations in order, with one item going through them and the Service Centre status strip showing where it is at each. The stations: Goods in, Inspection in, Coating, Inspection out and packing, Ready and loading.
Inspection out and packing to Ready and loading: the item reads Completed
From the live engine
What goes in and what comes out
What it runs
- Goods in
- Inspection in
- Coating
- Inspection out and packing
- Ready and loading
Outputs
- Price per batch
- Batch sheet PDF
- Service docket PDF
- Label
- Packing list
- Customer approval by link
How you get it
A preset installs it with its defaults, and you set your own rates.
- Surface treatment and metal finishing
Other service models
- Tool regrind and recoatRegrind and recoat of solid shank tools, each tool marked, measured and priced on what inspection finds.
- Saw sharpening and retippingSharpening, retipping and body work for circular saw blades and bandsaws, tooth by tooth.
- Blade and knife regrindRegrinding of planer and profile knives and reversible inserts, with width and profile recorded.
- Wheel re-profiling and balancingRe-profiling and balancing on the bore cutter and hogger family, with run out measured before and after.
- PCD re-tip and regrindDiamond tip replacement and erosion on PCD shank tools and saw blades, balanced before they go back.
- Hob sharpening and recoatSharpening and recoating of gear hobs on the shank tool family, each hob confirmed before work.
- Toolholder restorationTaper restoration and balancing of toolholders, with a packaging line added to every job.
- Gauge and instrument calibrationCalibration of gauges and instruments through goods in, inspection, marking and a final check.
- Coolant managementSite visits to clean out and refill machine coolant systems, with no item registered.
Questions
- Yes. The same preset installs the coating and treatment selector wizard beside it.More on Coating and treatment selector
- A minimum batch rule is installed, at the value you set.