Can it make a TCT blade to order?

Not today. The design module sets out PCD blades only; TCT blades match from your catalogue.

What does the PCD blade design module check?

Kerf against plate, bore against diameter and the tooth pitch for a PCD tip, each an example margin you confirm.

Yes. Under Saw sharpening and retipping each blade keeps its own code, and retipping is timed per tooth.

Tipped blades are chosen by board, machine and tooth form, and a PCD blade is set out tooth by tooth.

From a real test file

Tipped blades for non ferrous
3 off 300mm 96T carbide tipped circular saw blade, 30mm bore, TCG tooth form, for non ferrous
TCG read as the tooth form, carbide tipped as the material, then matched line by line.
A PCD blade to drawing
1 off custom tipped circular saw blade, PCD, 300mm diameter, 30mm bore, 72 teeth, TCG tooth form, 2.6mm plate.
Set out tooth by tooth against kerf, bore and pitch rules; tips, discs and body priced.

Settings, Presets

Design module

PCD saw blades
Diamond tipped circular blades built tooth by tooth, with the discs, brazes and body blank priced.
Produces body blank dxf, tip and disc schedule, spec sheet, step

4 product schemas

2 wizards

Bandsaw blade wizard
Material, section and machine in; the correct blade specification out, matched against your own catalogue.
PCD saw blade selector
From the machine, the board and what you know of the spindle, the full blade specification: tip material, diameter and bore, kerf and plate, tooth count and form, hook angle and running conditions, every line with its published why, matched to your catalogue or handed straight into the PCD saw blade design module.

Not this preset: Resharpening blades that come back. Saw sharpening and retipping covers that.

Needs Sales Engineer, Design Engineer and Wizard.

2 services

3 customer fields

Collection address
Where items are collected from when it is not the billing address.
Collection day
Choice of 6: Monday, Tuesday, Wednesday and more
Return carrier account
The customer's own carrier account, where returns go on their number.

Not this preset: Selling new blades. Saw blades covers that, and the two work together.

Services arrive switched off, because the figures in them are illustrative starting points. Open each one, set your rates, then switch it on.

Needs Service Centre.

Saw blades is on

From the live engine

What each preset installs

Saw blades
- Four blade schemas
- Bandsaw blade wizard
- PCD saw blade selector
- PCD saw blade design module
Saw sharpening and retipping
- Saw blade sharpening and retipping
- Cold saw resharpening and re-segmenting
- Saw sharpening service model

Not for: Making TCT blades to order: the saw blade design module is PCD only, so TCT blades sell from your catalogue.

: Not today. The design module sets out PCD blades only; TCT blades match from your catalogue.
: Kerf against plate, bore against diameter and the tooth pitch for a PCD tip, each an example margin you confirm.More on PCD saw blades
: Yes. Under Saw sharpening and retipping each blade keeps its own code, and retipping is timed per tooth.More on Saw sharpening and retipping