Design module
Gaskets
Full face, ring, rectangular and drawn gaskets cut from sheet, priced with a cut ready profile.
From the live engine
What goes in and what comes out
Parameters
- Shape
- Flange standard
- Outside diameter (mm)
- Inside diameter (mm)
- Bolt circle diameter (mm)
- Bolt hole count
- Bolt hole diameter (mm)
- Length (mm)
- Width (mm)
- Corner radius (mm)
- Thickness
- Material
Outputs
- Price from your own rates
- Cut ready DXF
- Sheet take off
- Spec sheet PDF
How you get it
A preset installs it with its defaults, and you set your own rates.
- Gaskets and sealing
Other design modules
- Soft jawsMachinable soft jaw sets for wedge type lathe chucks, with the grip pocket cut to the workpiece.
- Cut to size plasticsPlastic sheet, rod and tube cut to size from stock, or a part cut to an outline you draw.
- Balustrades and handrailsBalustrade and handrail runs set out as a fabricator quotes them: level runs, corners, stair rakes and landings.
- PCD saw bladesDiamond tipped circular saw blades built tooth by tooth, with tips, discs, braze and body blank priced.
- PCD profile cuttersDiamond tipped profile and jointing cutters on steel bodies, with knife form, disc yield and body billet priced.
- Solid carbide endmillsSolid carbide endmills and form cutters ground from rod, with grinding priced pass by pass.
Questions
- DN15 to DN200 at PN16, or a custom bolt pattern. A drawn outline covers any other shape.
- CNAF jointing, EPDM, nitrile, PTFE and graphite laminate, in 1.5, 3 or 6 mm, as the preset installs them.