Toolholding
Spindle holders by taper and clamping, with the gauge length, bore and balance the job needs.
The design module's own 3D model of the tool, opening on Shrink fit chuck. Choose a preset or change a value and the tool and its example price change with it.
- Interface
- HSK (DIN 69893)
- HSK form
- A, automatic change
- HSK size
- 63
- Clamping diameter D1
- 12 mm
- Gauge length
- Standard for the size
- Nose contour
- Standard for the size
- Balance
- G2.5 at 25,000 rpm
- 1 off£401.67
- 5 off£344.07
- 10 off£336.87
- 25 off£332.55
Example unit prices from the design engine, before VAT.
What you can configure
- Holder
- Shrink fit chuck
- ER collet chuck
- Hydraulic chuck
- Side lock holder (Weldon or whistle notch)
- Face mill arbor
- Machine side
- Interface, HSK form, HSK size, BT size, CAT size, Taper accuracy, Pull stud, Data chip pocket
- Clamping side
- Clamping diameter D1, Clamping bore tolerance, Collet size, Clamping nut, Collet class, Adjusting screw, Shank type held, Clamping screws
- Length and nose
- Gauge length, Gauge length A, Nose contour, Nose diameter D2, Body diameter D3, Nose taper, per side, Nose length, Clamping bore length L
From request to drawing
Design
The true holder is drawn: taper and flange from the interface table, the nose at its gauge length, the clamping bore, the nut and the drive keys.
Rules
The shank is checked against the chuck, the coolant form against the pull stud, and the runout and balance at the speed asked for.
Price
The steel bar, the bought in parts and the counted work are taken off, then priced.
Documents and files
The axial section DXF, the cutting list and the specification sheet come off the same design, on the quote.
- Customer drawing
- Axial section DXF
- Cutting list with the designation
- Spec sheet
- STEP, STL and GLB
The customer drawing the Toolholding design module exports for the tool in its preview on this page: the first sheet, with the dimensioned view, the views of the 3D model, the tool data and its example prices.
The customer drawing of the tool in the preview
Open the sheetIndustrial operations, transformed.
Book a walkthrough on a live demonstration in toolholding.