Solid round tools
End mills, drills, reamers and form tools ground from solid, designed to the request and priced on the rod they are cut from.
The design module's own 3D model of the tool, opening on End mill. Choose a preset or change a value and the tool and its example price change with it.
- Cutting diameter
- 12 mm
- Shank diameter
- 12 mm
- Overall length
- 83 mm
- Length of cut
- 26 mm
- Flutes
- 4
- Helix angle
- 38°
- 1 off£97.88
- 5 off£49.90
- 10 off£43.90
- 25 off£38.29
Example unit prices from the design engine, before VAT.
What you can configure
- Families
- End mills
- Drills
- Step drills
- Reamers
- Counterbores
- Countersinks
- Profile and form cutters
- End form
- Square end
- Corner radius
- Ball nose
- Chamfer
- Custom form
- Tool
- Cut direction, Helix hand, Tolerance class
- Dimensions
- Cutting diameter, Shank diameter, Overall length, Length of cut, Corner radius, Necked below the flutes, Neck diameter, Reach below the shank
- Flutes
- Flutes, Helix angle, Flute section, Core diameter, Land width, Margin, Primary relief, Flute run out
From request to drawing
Design
Choose the family and the tool is set out as a grinder would: flute section, helix, core and land, the gash and the relief.
Rules
Your design rules check every value and say what cannot be made, and why.
Price
The rod is matched on the largest ground diameter, the grinding priced pass by pass and the coating against its lot minimum.
Drawing and files
The customer drawing, the grinding schedule and the STEP file come off the same design, on the quote.
- Customer drawing
- Rod and grinding schedule
- Spec sheet
- STEP
The customer drawing the Carbide endmills design module exports for the tool in its preview on this page: the first sheet, with the dimensioned view, the views of the 3D model, the tool data and its example prices.
The customer drawing of the tool in the preview
Open the sheetThe wizard for this focus
Wizard turns the application into a specification, then into a recommendation from your own range.
Machining tool selector
What it asks
- The part
- The material
- The machining
- The cut
- Finish and tolerance
- The machine
What it returns
From the part, the material and the cut, the tool to use and the cutting data to run it at: diameter, flutes and coating or the insert, the grade and the chipbreaker, with the speed, the feed, the depth, the removal rate and the power at the cut, every line carrying the published table it was read from, matched to what you hold.
Industrial operations, transformed.
Book a walkthrough on a live demonstration in solid round tools.